# Uncategorized

**URL:** https://forum.hardwario.com/c/uncategorized/1.md

[Latest](https://forum.hardwario.com/latest.md) · [Categories](https://forum.hardwario.com/categories.md)

---

## [GNSS for CHESTER-U1 and CHESTER-M](https://forum.hardwario.com/t/gnss-for-chester-u1-and-chester-m/824)

<div class="topic-metadata">

**Author:** [@david.santoso](https://forum.hardwario.com/u/david.santoso)\
**Replies:** 0\
**Last updated:** [November 5, 2024, 3:39pm UTC](https://forum.hardwario.com/t/gnss-for-chester-u1-and-chester-m/824 "2024-11-05T15:39:29Z")

</div>

Hi, The latest baseline specifies GNSS use based on the hardware configuration. For CHESTER-U1 devices, GNSS is automatically enabled through the LTE v2 module, while CHESTER-M devices use the SAM-M8Q module. However, s…

---

## [Cloud v2 FOTA - Can the firmware revert back?](https://forum.hardwario.com/t/cloud-v2-fota-can-the-firmware-revert-back/822)

<div class="topic-metadata">

**Author:** [@david.santoso](https://forum.hardwario.com/u/david.santoso)\
**Replies:** 1\
**Last updated:** [November 4, 2024, 7:47am UTC](https://forum.hardwario.com/t/cloud-v2-fota-can-the-firmware-revert-back/822 "2024-11-04T07:47:13Z")

</div>

Hi, After a firmware upgrade via FOTA, can the CHESTER automatically revert to the previous version if it fails to establish a connection to the cloud? Best, David

---

## [USB dongle on Rpi5](https://forum.hardwario.com/t/usb-dongle-on-rpi5/788)

<div class="topic-metadata">

**Author:** [@noavakv](https://forum.hardwario.com/u/noavakv)\
**Replies:** 9\
**Last updated:** [March 22, 2024, 10:56am UTC](https://forum.hardwario.com/t/usb-dongle-on-rpi5/788 "2024-03-22T10:56:31Z")

</div>

Dobrý den, snažím se nainstalovat USB dongle na novém Rpi5. Mqtt server mi běží v kontejneru a Node-Red spustím jako součást HA proto si myslím že není třeba instalovat node.js a pm2 (později bych spouštěl pomoci system…

---

## [Thermostat replacement with relay module](https://forum.hardwario.com/t/thermostat-replacement-with-relay-module/725)

<div class="topic-metadata">

**Author:** [@findmyname](https://forum.hardwario.com/u/findmyname)\
**Replies:** 1\
**Last updated:** [January 3, 2023, 10:34am UTC](https://forum.hardwario.com/t/thermostat-replacement-with-relay-module/725 "2023-01-03T10:34:39Z")

</div>

Hello, I have Salus 091FLV2 thermostat to control temperature at home. It is pretty dump device. I’m thinking to replace with something smarter. The question is would it be to possible to use relay module instead? Ther…

---

## [Open firmware for LoRa module](https://forum.hardwario.com/t/open-firmware-for-lora-module/705)

<div class="topic-metadata">

**Author:** [@janakj](https://forum.hardwario.com/u/janakj)\
**Replies:** 0\
**Last updated:** [July 6, 2022, 7:33am UTC](https://forum.hardwario.com/t/open-firmware-for-lora-module/705 "2022-07-06T07:33:30Z")

</div>

Hello Everyone, I have been putting together an alternative open source firmware for the LoRa Module: The firmware is a drop-in replacement for the Murata Modem firmware pre-installed on the modules. It provides a co…

---

## [Mqtt2influxdb parse](https://forum.hardwario.com/t/mqtt2influxdb-parse/693)

<div class="topic-metadata">

**Author:** [@Budul](https://forum.hardwario.com/u/Budul)\
**Replies:** 1\
**Last updated:** [January 31, 2022, 10:36am UTC](https://forum.hardwario.com/t/mqtt2influxdb-parse/693 "2022-01-31T10:36:40Z")

</div>

HI, I am traying send IP address through mqqt to influxdb, but when I try send it, I got parse error in .pm2/logs/mqtt2influxdb-error.log ERROR: parse json: Extra data: line 1 column 3 (char 2) topic: node/IP/extip I…

---

## [BigClown USB Dongle - nastavení MQTT](https://forum.hardwario.com/t/bigclown-usb-dongle-nastaveni-mqtt/691)

<div class="topic-metadata">

**Author:** [@sedaj](https://forum.hardwario.com/u/sedaj)\
**Replies:** 7\
**Last updated:** [January 27, 2022, 6:54am UTC](https://forum.hardwario.com/t/bigclown-usb-dongle-nastaveni-mqtt/691 "2022-01-27T06:54:44Z")

</div>

Dobrý den, potřeboval bych poradit kde lze nastavit aby BigClown USB Dongle posílal zprávy na jiný MQTT broker než je 127.0.0.1 provozoval jsem BigClown v LXC na Turris Omnia a vše fungovalo OK až do migrace z TOS 3.x…

---

## [LoRa firmware upgrade over USB](https://forum.hardwario.com/t/lora-firmware-upgrade-over-usb/678)

<div class="topic-metadata">

**Author:** [@janakj](https://forum.hardwario.com/u/janakj)\
**Replies:** 1\
**Last updated:** [December 1, 2021, 10:15am UTC](https://forum.hardwario.com/t/lora-firmware-upgrade-over-usb/678 "2021-12-01T10:15:31Z")

</div>

My LoRa modules have firmware ranging from 1.0.02 to 1.1.06. Is it possible to upgrade the firmware without having to solder anything or use the JTAG interface? Could the firmware be upgraded over USB, e.g., using this: h…

---

## [Playground - Beaglebone black](https://forum.hardwario.com/t/playground-beaglebone-black/672)

<div class="topic-metadata">

**Author:** [@Milan](https://forum.hardwario.com/u/Milan)\
**Replies:** 2\
**Last updated:** [September 23, 2021, 4:53pm UTC](https://forum.hardwario.com/t/playground-beaglebone-black/672 "2021-09-23T16:53:02Z")

</div>

Dobrý den, půjde nainstalovat Hardvario playground na Beaglebone black? Pokud ano, je někde postup jak instalovat. Děkuji Milan Augustin

---

## [Hardwario Playground](https://forum.hardwario.com/t/hardwario-playground/671)

<div class="topic-metadata">

**Author:** [@Milan](https://forum.hardwario.com/u/Milan)\
**Replies:** 7\
**Last updated:** [September 17, 2021, 2:12pm UTC](https://forum.hardwario.com/t/hardwario-playground/671 "2021-09-17T14:12:23Z")

</div>

Dobrý den, používám aplikaci Hardwario Playground Win. 10. V Node Red potřebuji vložit obrázky (ikony), nemohu přijít kam (do jakého adresáře ) moje ikony uložit. Děkuji Milan Augustin

---

## [RFC: Configure RF band via EEPROM?](https://forum.hardwario.com/t/rfc-configure-rf-band-via-eeprom/669)

<div class="topic-metadata">

**Author:** [@janakj](https://forum.hardwario.com/u/janakj)\
**Replies:** 1\
**Last updated:** [August 30, 2021, 10:33am UTC](https://forum.hardwario.com/t/rfc-configure-rf-band-via-eeprom/669 "2021-08-30T10:33:18Z")

</div>

Some of my sensors operate in the 915 MHz frequency band. According to the documentation, one needs to recompile the firmware with the environment variable BAND=915 to enable this frequency band. Although I know how to d…

---

## [Calibration of soil moisture sensor](https://forum.hardwario.com/t/calibration-of-soil-moisture-sensor/471)

<div class="topic-metadata">

**Author:** [@mlnz](https://forum.hardwario.com/u/mlnz)\
**Replies:** 2\
**Last updated:** [August 4, 2021, 7:51am UTC](https://forum.hardwario.com/t/calibration-of-soil-moisture-sensor/471 "2021-08-04T07:51:26Z")

</div>

Hello, I am using new soil moisture sensor and when is whole sensor in the water, it shows 80% moisture… Probably I can calibrate the sensor, but I am not sure if I am doing something wrong… I have two sensors and both …

---

## [Core module as a gateway not working?](https://forum.hardwario.com/t/core-module-as-a-gateway-not-working/653)

<div class="topic-metadata">

**Author:** [@ajsicek](https://forum.hardwario.com/u/ajsicek)\
**Replies:** 2\
**Last updated:** [May 2, 2021, 11:39am UTC](https://forum.hardwario.com/t/core-module-as-a-gateway-not-working/653 "2021-05-02T11:39:59Z")

</div>

Hi, I am successfully using dongle with couple of nodes, but through couple of walls the connectivity is rather unstable. So I wanted to try out the new external antenna core module as a dongle if that would help. Unfor…

---

## [Light up led strip based on motion and light intensity](https://forum.hardwario.com/t/light-up-led-strip-based-on-motion-and-light-intensity/614)

<div class="topic-metadata">

**Author:** [@findmyname](https://forum.hardwario.com/u/findmyname)\
**Replies:** 4\
**Last updated:** [February 15, 2021, 2:54pm UTC](https://forum.hardwario.com/t/light-up-led-strip-based-on-motion-and-light-intensity/614 "2021-02-15T14:54:03Z")

</div>

Hi Pros, I’m planning to install LED strip into our kitchen. But I would like to have it a little bit smart e.g.: light up LEDs only when there is some motion AND current light intensity in room is \< threshold. I pla…

---

## [LED pásek, jak je to s MQTT příkazy pro jednotlivé LED v pásku??](https://forum.hardwario.com/t/led-pasek-jak-je-to-s-mqtt-prikazy-pro-jednotlive-led-v-pasku/649)

<div class="topic-metadata">

**Author:** [@kutilak](https://forum.hardwario.com/u/kutilak)\
**Replies:** 2\
**Last updated:** [February 4, 2021, 10:40am UTC](https://forum.hardwario.com/t/led-pasek-jak-je-to-s-mqtt-prikazy-pro-jednotlive-led-v-pasku/649 "2021-02-04T10:40:59Z")

</div>

Ahoj, jsou tu někde vysvětlivky k těmto MQTT příkazům ? Barevné efekty mi fungujou, ale rád bych si nastavoval barvu každé ledky po svém. Brightness a color mi nefunguje vůbec.

---

## [LoRa module forgetting configuration](https://forum.hardwario.com/t/lora-module-forgetting-configuration/647)

<div class="topic-metadata">

**Author:** [@janakj](https://forum.hardwario.com/u/janakj)\
**Replies:** 3\
**Last updated:** [February 3, 2021, 4:06pm UTC](https://forum.hardwario.com/t/lora-module-forgetting-configuration/647 "2021-02-03T16:06:51Z")

</div>

One of my LoRa modules stopped working recently. While debugging the problem via the AT interface, I found that the module had forgotten all of its settings: AT$NWKSKEY? $NWKSKEY: OK AT$APPSKEY? $APPSKEY: OK AT$DEVEUI…

---

## [Pochopení implementace MQTT v kódu](https://forum.hardwario.com/t/pochopeni-implementace-mqtt-v-kodu/646)

<div class="topic-metadata">

**Author:** [@kutilak](https://forum.hardwario.com/u/kutilak)\
**Replies:** 1\
**Last updated:** [January 22, 2021, 3:25pm UTC](https://forum.hardwario.com/t/pochopeni-implementace-mqtt-v-kodu/646 "2021-01-22T15:25:06Z")

</div>

Zdravím, snažím se porozumět implementaci MQTT, tedy přesněji tomu, jak bych měl implementovat například relé tak, abych ho mohl ovládat z node-red. Metodou pokus omyl jsem už přišel na to že nejlepší výchozí kód je prav…

---

## [Change of prefix \`bc\_\` to \`twr\_\` in the SDK](https://forum.hardwario.com/t/change-of-prefix-bc-to-twr-in-the-sdk/643)

<div class="topic-metadata">

**Author:** [@hub.martin](https://forum.hardwario.com/u/hub.martin)\
**Replies:** 0\
**Last updated:** [January 5, 2021, 4:04pm UTC](https://forum.hardwario.com/t/change-of-prefix-bc-to-twr-in-the-sdk/643 "2021-01-05T16:04:00Z")

</div>

Hello everyone, our electronic building kit was renamed from BigClown Kit to Tower Kit and now we also changed SDK function prefixes from bc\_ to twr\_. However you can still use bc\_ prefix if you like, we kept them as t…

---

## [Řiditelná hlavice topení](https://forum.hardwario.com/t/riditelna-hlavice-topeni/640)

<div class="topic-metadata">

**Author:** [@rottik](https://forum.hardwario.com/u/rottik)\
**Replies:** 2\
**Last updated:** [December 22, 2020, 1:40pm UTC](https://forum.hardwario.com/t/riditelna-hlavice-topeni/640 "2020-12-22T13:40:38Z")

</div>

Zdravím Vás přátelé, pořizoval jste si někdo řiditelnou hlavici na topení, kterou by šlo programově ovládat? Jaké jsou Vaše zkušenosti a existuje něco takového?

---

## [Meaning of channel MQTT topic component](https://forum.hardwario.com/t/meaning-of-channel-mqtt-topic-component/633)

<div class="topic-metadata">

**Author:** [@janakj](https://forum.hardwario.com/u/janakj)\
**Replies:** 3\
**Last updated:** [October 27, 2020, 12:10pm UTC](https://forum.hardwario.com/t/meaning-of-channel-mqtt-topic-component/633 "2020-10-27T12:10:21Z")

</div>

My climate module generates the following MQTT topics: 2020-10-27 09:50:56.65 node/climate-monitor:1/hygrometer/0:4/relative-humidity 56.7 2020-10-27 09:53:31.46 node/climate-monitor:1/lux-meter/0:0/illuminance 42.1 202…

---

## [SysTick Interrupt in the SDK](https://forum.hardwario.com/t/systick-interrupt-in-the-sdk/622)

<div class="topic-metadata">

**Author:** [@janakj](https://forum.hardwario.com/u/janakj)\
**Replies:** 4\
**Last updated:** [October 20, 2020, 8:26am UTC](https://forum.hardwario.com/t/systick-interrupt-in-the-sdk/622 "2020-10-20T08:26:45Z")

</div>

Why does the SDK enable the SysTick interrupt? Apart from incrementing the global uwTick variable, I can’t seem to be able to find any other use case for it. With deep-sleep enabled, the uwTick variable and the SysTick …

---

## [LoRa Session Keys in OTAA Mode](https://forum.hardwario.com/t/lora-session-keys-in-otaa-mode/617)

<div class="topic-metadata">

**Author:** [@janakj](https://forum.hardwario.com/u/janakj)\
**Replies:** 2\
**Last updated:** [September 21, 2020, 6:34pm UTC](https://forum.hardwario.com/t/lora-session-keys-in-otaa-mode/617 "2020-09-21T18:34:29Z")

</div>

I’ve got the LoRa module connected to the LoraWAN operated by Ceske Radiokomunikace in the Czech Republic. The module is configured in the OTAA mode and everything works great. However, I wonder what keys are returned b…

---

## [Restart/Reboot core module from software](https://forum.hardwario.com/t/restart-reboot-core-module-from-software/610)

<div class="topic-metadata">

**Author:** [@dk-teknologisk-mnc](https://forum.hardwario.com/u/dk-teknologisk-mnc)\
**Replies:** 2\
**Last updated:** [July 3, 2020, 11:56am UTC](https://forum.hardwario.com/t/restart-reboot-core-module-from-software/610 "2020-07-03T11:56:33Z")

</div>

Is it possible to reboot the Core Module with the BigClown Firmware SDK? And how? Regards!

---

## [Radio pool sensor firmware and core module temperature](https://forum.hardwario.com/t/radio-pool-sensor-firmware-and-core-module-temperature/598)

<div class="topic-metadata">

**Author:** [@ajsicek](https://forum.hardwario.com/u/ajsicek)\
**Replies:** 2\
**Last updated:** [June 15, 2020, 11:05am UTC](https://forum.hardwario.com/t/radio-pool-sensor-firmware-and-core-module-temperature/598 "2020-06-15T11:05:28Z")

</div>

We are using radio-pool-sensor firmware for reading few 1 wire temperature sensors. With some success we are getting 1 wire temperatures, but there is no core module temperature beeing sent to mqtt. Is that because it i…

---

## [Proof-of-Concept: Updating firmware of Core module over WiFi using WiFi module](https://forum.hardwario.com/t/proof-of-concept-updating-firmware-of-core-module-over-wifi-using-wifi-module/532)

<div class="topic-metadata">

**Author:** [@MatousSloboda](https://forum.hardwario.com/u/MatousSloboda)\
**Replies:** 6\
**Last updated:** [January 17, 2020, 9:33am UTC](https://forum.hardwario.com/t/proof-of-concept-updating-firmware-of-core-module-over-wifi-using-wifi-module/532 "2020-01-17T09:33:54Z")

</div>

Hi there, if I’m right there’s no other way how to update firmware of Core module except over USB (using dfu or by FTDI chip). Would it be theoretically possible to upgrade firmware using connected ESP8266 in WiFi modu…

---

## [TRÅDFRI & BigClown](https://forum.hardwario.com/t/tradfri-bigclown/529)

<div class="topic-metadata">

**Author:** [@msgre](https://forum.hardwario.com/u/msgre)\
**Replies:** 4\
**Last updated:** [January 8, 2020, 3:45pm UTC](https://forum.hardwario.com/t/tradfri-bigclown/529 "2020-01-08T15:45:57Z")

</div>

Hello! Does anyone tried Ikea TRÅDFRI and BigClown modules in same home? I am curious if those two kind of wireless devices can work reliably without jamming each other. Thanks. Michal

---

## [Bcf-kit-sigfox-climate-monitor - data received](https://forum.hardwario.com/t/bcf-kit-sigfox-climate-monitor-data-received/342)

<div class="topic-metadata">

**Author:** [@Michal](https://forum.hardwario.com/u/Michal)\
**Replies:** 3\
**Last updated:** [January 2, 2020, 11:29am UTC](https://forum.hardwario.com/t/bcf-kit-sigfox-climate-monitor-data-received/342 "2020-01-02T11:29:55Z")

</div>

Hello, I succesfully uploaded firmware bcf-kit-sigfox-climate-monitor and I am receiving some data to sigfox backend. But for me it looks that data received are a bit strange. From firmware code i expect to receive 7 …

---

## [Integration with Fingerbot?](https://forum.hardwario.com/t/integration-with-fingerbot/526)

<div class="topic-metadata">

**Author:** [@peci1](https://forum.hardwario.com/u/peci1)\
**Replies:** 0\
**Last updated:** [December 30, 2019, 10:36am UTC](https://forum.hardwario.com/t/integration-with-fingerbot/526 "2019-12-30T10:36:39Z")

</div>

If anyone successfully integrates BigClown with FingerBot, let us know :slight\_smile:

---

## [Enhancements for lora gps tracker](https://forum.hardwario.com/t/enhancements-for-lora-gps-tracker/520)

<div class="topic-metadata">

**Author:** [@wwbusch](https://forum.hardwario.com/u/wwbusch)\
**Replies:** 2\
**Last updated:** [November 13, 2019, 4:04pm UTC](https://forum.hardwario.com/t/enhancements-for-lora-gps-tracker/520 "2019-11-13T16:04:03Z")

</div>

Hi dear FW develops of the lorawan gps tracker, after using it for a few days (and knowing also Adeunis Field test device) i would like to recomend some enhancements for even more functionality :-)) 1.) It should be pos…

---

## [LoRa Module with single channel gateway](https://forum.hardwario.com/t/lora-module-with-single-channel-gateway/516)

<div class="topic-metadata">

**Author:** [@hub.martin](https://forum.hardwario.com/u/hub.martin)\
**Replies:** 0\
**Last updated:** [October 11, 2019, 3:00pm UTC](https://forum.hardwario.com/t/lora-module-with-single-channel-gateway/516 "2019-10-11T15:00:27Z")

</div>

Hi, if you would need to configure LoRa Module for single channel gateway, for example with some Rpi hat or ESP8266/ESP32. Then you can use this configuration for SF7BW125 and 868.1MHz frequency. Open file sdk/bcl/src/b…

[Next page](https://forum.hardwario.com/c/uncategorized/1.md?page=1)
